This innovative & effective tool quickly clears blocked & slow running sinks, basins, showers & baths. A burst of compressed air, from the Pango's manually primed cylinder, is fired into the blocked waste pipe (pipe must first be back filled with water) to produce a kinetic transfer of energy. This action safely shifts normally encountered 'soft' organic matter, the cause of most domestic waste pipe blockages. ...

For kitchen, bathroom, laundry drains & pipes from 114;in. up to 3in. Particularly useful in awkward places when the cable is difficult to feed. To feed the cable just start the Power-Vee & squeeze the feed lever; to retract it, reverse the motor & squeeze the lever. The feed handles 1/4", 5/16" & 3/8" cables. No adjustment, disassembly, or additional parts required. Drives cables at 16ft. per minute. Double insulated motor with reverse & variable speed trigger switch. Drum Cable maximum capacity
- 35ft. x 3/8in. or 50ft. x 5/16in.. Cable (s) included are 25ft. x 14;in. 3193Y (25HE1) with Basin Plug Head & 25ft. x 3/8in. 3200A (25HE2) with female connector. Complete with HECS cutter set.
...

A top notch, UK made set of rods & attachments, for professional plumbers & home user alike, that fully extended will reach up to 30ft (9M). Each polypropylene rod, plus each attachment, has a brass universal joint for quick & secure fitting. ...

The Speedrooter is the ideal all-round machine, suitable for clearing drain lines from 100-200mm in diameter. Supplied as standard with 100ft of 34; inch diameter cable* (23mx 19mm), the Speedrooter will quickly clear soft stoppages & go on to remove scale & cut through root infestation. A powerfeed unit feeds & retrieves the cable effortlessly without the need for manual handling. The user friendly Speedrooter can be loaded onto a van utilising the loading wheel on the handle & manoeuvred up stairs using the stair climbers. Further, it incorporates an adjustable height handle; It can be three inches longer or more compact, depending upon your preference. * Heavy-gauge wire coiled tightly around 49-strand aircraft-type wire rope & heat treated. Has unequalled strength & the right amount of flexibility. ...

This kit is especially designed for removing stiff backnuts from awkward placed taps. Stays in position on the tap tail so can be used with one hand & uses mechanical advantage of the thread of the tap tail to remove stiff nuts. ...

For tracing the direction of flow or to where a drain pipe runs. The recommended dilution rate is approx. 230g to 9 litres of water. The liquid is then use at a rate of 140ml-250ml per 450 litres, depending on the ground conditions. Approx. 230g of drain dye will treat 28, 800 litres at 140ml per 450 litres & up to 16, 200 litres at 250ml per 450 litres. ...

For tracing the direction of flow or to where a drain pipe runs. The recommended dilution rate is approx 230g to 9 litres of water. The liquid is then use at a rate of 140ml-250ml per 450 litres, depending on the ground conditions. Approx. 230g of drain dye will treat 28, 800 litres at 140ml per 450 litres & up to 16, 200 litres at 250ml per 450 litres. ...

For tracing the direction of flow or to where a drain pipe runs. The recommended dilution rate is approx. 230g to 9 litres of water. The liquid is then use at a rate of 140ml-250ml per 450 litres, depending on the ground conditions. Approx. 230g of drain dye will treat 28, 800 litres at 140ml per 450 litres & up to 16, 200 litres at 250ml per 450 litres. ...

For tracing the direction of flow or to where a drain pipe runs. The recommended dilution rate is approx. 230g to 9 litres of water. The liquid is then use at a rate of 140ml-250ml per 450 litres, depending on the ground conditions. Approx. 230g of drain dye will treat 28, 800 litres at 140ml per 450 litres & up to 16, 200 litres at 250ml per 450 litres. ...

For tracing the direction of flow or to where a drain pipe runs. The recommended dilution rate is approx. 230g to 9 litres of water. The liquid is then use at a rate of 140ml-250ml per 450 litres, depending on the ground conditions. Approx. 230g of drain dye will treat 28, 800 litres at 140ml per 450 litres & up to 16, 200 litres at 250ml per 450 litres. ...