More From Contributor

£44.00
Application Compatible for Opel Astra G 1998
- 2009 Petrol: 1.2, 1.4, 1.6, 1.8, 2.2, 2.0, 2.0 T, Diesel: 1.7 CDTI, 1.7
...
Archived Product
£26.00
Application Compatible for Opel Astra G 1998
- 2009 Petrol: 1.2, 1.4, 1.6, 1.8, 2.2, 2.0, 2.0 T, Diesel: 1.7 CDTI, 1.7
...
Archived Product
£65
Application Compatible for PEUGEOT 207 (WA_, WC_) (2006/02
- /) Compatible for PEUGEOT 207 CC (WD_) (2007/02
- /) Compatible

...
Archived Product
£50.00
Application Compatible for PEUGEOT 207 (WA_, WC_) (2006/02
- /) Compatible for PEUGEOT 207 CC (WD_) (2007/02
- /) Compatible

...
Archived Product
£369
Application Compatible for Peugeot 106 GTi / S16 1.6L TU5J4 Note- Professional installation is highly recommended (No Instruction Included)- Custom Service: If there's no conrods you need on our site, we would be happy to help determine your requirements & develop a solution with you to satisfy your needs. Specification Performance Con Rods Type: Forged 4340 aircraft chrome moly quality steel for racing H-beam Conrods Quantity: 4 Pieces a set Bolts: Including Genuine 3/8" ARP 2000 bolts Note: Extra cost for upgrading to ARP L19 bolts Bolts

Size:
3/8" Tolerance: Balanced to +/- 1 gram in set Piston Bolt Hole: +-4/1000mm Power: 600hp ~ 800PS per set Strength of the fastening (PSI): 220, 000/230, 000 PSI Torque: 48ft ≈ 65 NM Top acceleration: 9000rpm warranty: one year warranty for any manufacturing defect Dimensions Center to center length: 133.5mm Big end diameter:48.66mm Small end diameter: 19.46mm Big end

Width:
24mm Small end

Width:
19.5mm Feature- Forged SAE 4340 Chrome Moly Steel for the highest st...





...
Archived Product
£103
Application Suspension Control Arm Wishbone+ Stabiliser Link+ Tie Rod End compatible for Peugeot 206 02-Specification Suspension arm: Fitting position: front axle lower
Material: cast steel Tie rod end: Thread type: with Outer thread Thread type: with right-hand thread Thread measurement: M14x 1.5 Anti-roll bar link: Length: 335 mm
Material: Cast steel Paired article numbers: 15951 Position: Front Axle Left Quantity required: 1 Steering Type: Control Arm Suspension arm / Wishbone Front complete
- Left side + Ball joints
Colour: Black 2x Steering Tie Rod End Length: 112 Paired article numbers: 40-16 020 5724/ HD Reinforced Version Thread Measurement 1: M10x 1, 25 Thread Size 2: M14x 1, 5 2x Steering tie rod end Length: 112 Paired article numbers: 40-16 020 5723/HD Reinforced Version Thread Measurement 1: M10x 1, 25 Thread Size 2: M14x 1, 5 Trailing Arm Bar/ Strut: Coupling Rod Length: 335
Material: Steel Position: Front Axle left & right Quantity required: 2 OEM & Part Number (s) Control arm set +...




...
Available
£450
Application Compatible for Peugeot 206 2.0 S16 Super 1600 TU5JP4 139mm

Specification- Performance Con Rods- Type: Forged

...
Archived Product
£189.00
Application Compatible for Peugeot 207 RC / 308 Compatible for MINI Cooper S 1.6T EP6DTS / EP6CDTSCompatible for BMW N13 / N14 1.6 T Fitment Details Engine: For the THP175 (EP6DTS, later EP6CDTS)2006–2010 compatible for Peugeot 207 RC2007–2010 compatible for MINI Cooper S2007-2011 compatible for MINI JCW (154 k W version of engine
- only used by compatible for BMW)2008–on compatible for Peugeot 3082010–on compatible for Citroën DS3 Racing
- EP6CDTS
- 202 hp 2012–2015 compatible for BMW 1 Series F20 114i 75 k W version 2011–2015 compatible for BMW 1 Series F20 116i 100 k W version 2012–2015 compatible for BMW 3 Series F30 316i 100 k W version 2011–2015 compatible for BMW 1 Series F20 118i 125 k W version 2012–2015 compatible for BMW 3 Series F30 320i ED 125 k W version 2015-2016 compatible for BMW 1 Series F20 120i 130 k W version Specification TüV Certification Con Rods Quantity: 4 Pieces a set as showing in picture Bolts: Including Genuine ARP 2000 3/8" bolts (Note Extra cost for upgrading to ARP L19 bolts)
Material: Forged 4340 EN24 aircraft chrome moly quality steel for racing Weight Tolerance: Balanced to +/- 1 gram in set Warranty: 2 years warranty. Dimensions: Center to center length: 138.5 mm Big end diameter: 48mm Small end diameter: 20mm Big end

Width:
20.8mm Small end

Width:
20.8mm Note* Professional installation is highly recommended (No Instruction Included)* For any needs please contact us







...
Archived Product
£450
Application Compatible for Peugeot 306 2.0L S16 XU10 XU10J4 152mm Specification Performance Con Rods Type: Forged 4340 aircraft chrome moly quality steel for racing H-beam Conrods Quantity: 4 Pieces a set Bolts: Including Genuine ARP 2000 bolts Note: Extra cost for upgrading to ARP L19 bolts Bolts

Size:
3/8" Tolerance: Balanced to +/- 1 gram in set Piston Bolt Hole: +-4/1000mm Power: 600hp ~ 800PS per set Strength of the fastening (PSI): 220, 000/230, 000 PSI Torque: 48ft ≈ 65 NM Top acceleration: 9000rpm warranty: one year warranty for any manufacture defect Dimensions Center to center length: 152mm Big end diameter: 53.7mm Small end diameter: 22mm Big end

Width:
24.2mm Small end

Width:
19.5mm Feature- Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing- Designed & processed by CNC machine.- All big & small ends are finished with SUNNEN honing machine- Precision alignment sleeves positively locate the rod cap, maintaining big end bore size & eliminatin...





...
Archived Product
£369
Application For Peogeot 306 GTi-6 / Rallye 2.0L S16 XU10J4RSSpecification Performance Con Rods Type: Forged 4340 aircraft chrome moly quality steel for racing H-beam Conrods Quantity: 4 Pieces a set Bolts: Including Genuine 3/8" ARP 2000 bolts Note: Extra cost for upgrading to ARP L19 bolts Bolts

Size:
3/8" Tolerance: Balanced to +/- 1 gram in set Piston Bolt Hole: +-4/1000mm Power: 600hp ~ 800hp set Strength of the fastening (PSI): 220, 000/230, 000 PSI Torque: 48ft ≈ 65 NM Top acceleration: 9000rpm warranty: one year warranty for any manufacturing defect Dimensions Center to center length: 158mm Big end diameter: 53.7mm Small end diameter: 20mm Big end

Width:
24.15mm Small end

Width:
19.5mm Feature- Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing- Designed & processed by CNC machine.- All big & small ends are finished with SUNNEN honing machine- Precision alignment sleeves positively locate the rod cap, maintaining big end bore size & eliminating cap walk- 100% X-rayed, sonic tested & magnafluxed- Multi-stage heat treated- Shot peened to relieve stress- Come with the bronzed bushing suitable for the floating piston pin Note- Professional installation is highly recommended (No Instruction Included)- Custom Service: If there's no conrods you need on our site, we would be happy to help determine your requirements & develop a solution with you to satisfy your needs.





...
Archived Product

Compatible For Peugeot 205 Rallye 1.3L TU24 H Beam 4340 Performance
Conrods ARP 2000 Bolts

ApplicationCompatible for Peugeot 205 Rallye 1.3L TU24NoteProfessional installation is highly recommended (No Instruction Included)Custom Service:If there's no conrods you need on our site, we would be happy to help determine your requirements and develop a solution with you to satisfy your needs. Learn more about CUSTOM SERVICESpecificationPerformance Con RodsType: Forged 4340 aircraft chrome moly quality steel for racingH-beam Conrods Quantity: 4 Pieces a setBolts: Including Genuine ARP 2000 boltsNote: Extra cost for upgrading to ARP L19 boltsBolts Size: 3/8" Tolerance: Balanced to +/- 1 gram in set Piston Bolt Hole: +-4/1000mm Power: 600hp ~ 800PS per set Strength of the fastening (PSI): 220, 000/230, 000 PSI Torque: 48ft ≈ 65 NM Top acceleration: 7000-9000rpm warranty: one year
warranty for any manufacture defectDimensionsCenter to center length: 112.3mmBig end diameter: 48.67mmSmall end diameter: 18.02mmBig end width: XXSmall end width: XXFeature- Forged SAE 4340 Chrome Moly Steel for the highest strength and durability, dedicated for Racing- Designed and processed by CNC machine- All big and small ends are finished with SUNNEN honing machine- Precision alignment sleeves positively locate the rod cap, maintaining big end bore size and eliminating cap walk- 100% X-rayed, sonic tested and magnafluxed- Multi-stage heat treated- Shot peened to relieve stress- Come with the bronzed bushing suitable for the floating piston pin
RIP - This product is no longer available on our network. It was last seen on 23.01.2024

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£369.00

Product Description

Application Compatible for Peugeot 205 Rallye 1.3L TU24 Note Professional installation is highly recommended (No Instruction Included) Custom Service: If there's no conrods you need on our site, we would be happy to help determine your requirements & develop a solution with you to satisfy your needs. Learn more about CUSTOM SERVICESpecification Performance Con Rods Type: Forged 4340 aircraft chrome moly quality steel for racing H-beam Conrods Quantity: 4 Pieces a set Bolts: Including Genuine ARP 2000 bolts Note: Extra cost for upgrading to ARP L19 bolts Bolts

Size:
3/8" Tolerance: Balanced to +/- 1 gram in set Piston Bolt Hole: +-4/1000mm Power: 600hp ~ 800PS per set Strength of the fastening (PSI): 220, 000/230, 000 PSI Torque: 48ft ≈ 65 NM Top acceleration: 7000-9000rpm warranty: one year warranty for any manufacture defect Dimensions Center to center length: 112.3mm Big end diameter: 48.67mm Small end diameter: 18.02mm Big end

Width:
XXSmall end

Width:
XXFeature- Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing- Designed & processed by CNC machine- All big & small ends are finished with SUNNEN honing machine- Precision alignment sleeves positively locate the rod cap, maintaining big end bore size & eliminating cap walk- 100% X-rayed, sonic tested & magnafluxed- Multi-stage heat treated- Shot peened to relieve stress- Come with the bronzed bushing suitable for the floating piston pin

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Facebook

Jargon Buster

Diameter - A measurement across a circle passing through the middle
Steel - An alloy made predominately of Iron combined with <2% carbon
Gram - 1000 Grams is equal to 1 Kilogram
Chrome - A shiney metalic finish where chromium is electroplated onto an object
Heat - A term used to define thermal energy
Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new
Stress - Also known as tension, a situation where a human can not cope with emotional or physical threats
quantity - A measurement, an amount or number
Chrome - A shiney bright metalic coating of chromium applied to metals
Torque - Torque is a measure of the turning force of an object. Such as a wrench turning a bolt, the higher the toque the higher the capability of undoing a tight bolt.
honing - A process for final surface finishing. Abrasive stones are used to remove minute amounts of material from a surface.
Year - The time it takes the planet earth to orbit the sun. This takes around 365.25 days.
Quality - An object that has quality is superior in function and finish than a less quality object.
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Size - is the measurement of how big an object is in space.
Small - something that takes up less space than normal.
Genuine - A product that is "real", from the manufactuer, not a fake.
Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.
Width - The measurement of something from one side to the other.
Fastening - A component hat closes or secures, e.g. a coat zip.
Year - 365 days (366 days in a leap year), the time taken for planet earth to make one full revolution around the sun.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Torque - The force used to turn, rotate, an object about an axis. The higher the torque the greater the ability to turn.

Supplier Information

Maxpeeding Rods UK
Page Updated: 2025-01-22 17:22:51

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu