Introduction MXR-B3 series (also called MXR-SLC) based on MXR-B2 series (also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for SUBARU IMPREZA WRX 2000.08-2007.06 GDA GD9 GGACompatible for SUBARU IMPREZA WRX STI 2000.10-2004.06 GDB (RIM P.C.D.=100) Compatible for SAAB 9-2X 2005-2007 GGA GGENotice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mounts: Pillow ball top mounts Damping: 24 levels rebound damping adjustable Adjustable

Height: Yes, lowering 1" to 3" Adjustable camber plate: Front only Spring rate Front: 9 kg/mm (504 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Gray Package includedproduct included: complete coilovers 2 front & 2 rear Dimension
Size: 71*51*21 cm Weight: 29.7 kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Pillow ball top mount
- It improves the steering feel & response. Camber plate top mounts help to eliminate the need for a separate camber kit. Twin-Tube structure allows sufficient stroke within the shock absorber. Complete Suspension Kit of 4 Shock Absorbers 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Full rebuildable. Warranty: one year warranty for any manufacturing defect






...

Application Compatible for Subaru Impreza WRX 2002-2007 GDA GDBCompatible for Subaru Impreza WRX STI 2004 GDA GDBCompatible for Subaru Impreza WRX Bugeye/ Blobeye Compatible for Subaru Impreza Outback Sport Compatible for Saab 9-2X 2004 2005 Specification Quantity: 2 piece front + 2 pieces rear as shown Adjustable damper: 24 ways adjustable damper force Adjustable

Height: Yes, lowering 1-3'' Adjustable camber plate: Yes（front only） Spring rate front: 9 kg/mm (504 lbs/in) Spring rate rear: 7 kg/mm (392 lbs/in) Shock type: Twin tube Top mounts: Pillow ball design
Colour: Gray Warranty: 2 years warranty for any manufacturing defect Feature- Twin Tube for longer stroke & softer initial response.- 24 levels of adjustable damper --- This allows you the ability to perfectly dial in your coilovers system. Ideal for any track, drift & fast road & can also be used for daily driving.- Independent ride-height adjustability separate from spring pre-load allowing the customer to set the ride height without having to worry about shock travel.- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response.- All inserts come with fitted rubber boots to protect the damper & keep clean.- Easy installation with right tools.- Anodized adjustable collars & spring seats for easy adjustment & prolonged cycle life.- Most components are made from 6061 aluminum with T6 for increased hardness --- the advantages include excellent strength, & aluminum helps keep the weight down.- Hi tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance. Note- No instruction included; Professional installation & alignment suggested.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.



...

overview Speaking of car parts, a coilover is one of the single best things you can do to suppress the shock. Maxpeedingrods has always aimed to stay at the forefront of offering high performance coilovers in UK. This coilover is guaranteed to compatible for Subaru Impreza 2008-2011. The damper & spring are assembled as a unit prior to installation, & are replaced as a unit when either of the sub-components fails. You can enjoy comfortable riding experience in all road conditions. Application Compatible for Subaru Impreza WRX STi 2011-2013 Limited Sedan 4D 2.5L DOHC Turbocharged 2011-2013 Sedan 4D 2.5L DOHC Turbocharged 2010 Special Edition Wagon 4D 2.5L DOHC Turbocharged 2008-2013 WRX STi Wagon 4D 2.5L DOHC Turbocharged Specification Quantity: 2 piece front + 2 pieces rear+ 2 spanners Spring rate Front:8 kg/mm (448 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Adjustable damper: Non Adjustable Damper Adjustable

Height: Yes Adjustable camber plate: Yes Warranty:2 year warranty for any manufacturing defect Feature- Adjustable ride height- Adjustable pre-load spring tension- Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response- Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down.
- Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- All inserts come with fitted rubber boots to protect the damper & keep clean.-A fast & affordable way to easily upgrade your car's appearance.- Easy installation with right tools. Note No instruction included; Professional installation & alignment suggested. Please check our store for other auto parts you may be interested in. Please feel free to contact us for whatever we can help.



...

overview Speaking of car parts, a coilover is one of the single best things you can do to suppress the shock. Maxpeedingrods has always aimed to stay at the forefront of offering high performance coilovers in UK. This coilover is guaranteed to compatible for Subaru Impreza Bugeye WRX GDB GDA SCB. The damper & spring are assembled as a unit prior to installation, & are replaced as a unit when either of the sub-components fails. You can enjoy comfortable riding experience in all road conditions. Application Compatible for Subaru Impreza WRX 2002-2007 GDA GDBCompatible for Subaru Impreza WRX STI 2004 GDA GDBCompatible for Subaru Impreza WRX Bugeye/ Blobeye Compatible for Subaru Impreza Outback Sport Compatible for Saab 9-2X 2004 2005 Specification Quantity: 2 piece front + 2 pieces rear as shown Adjustable

Height: Yes, lowering 1-3'' Adjustable camber plate: Yes（front only） Spring rate front: 9 kg/mm (504 lbs/in) Spring rate rear: 7 kg/mm (392 lbs/in) Shock type: Twin tube Top mounts: Pillow ball design
Colour: Blue Warranty: 2 years warranty for any manufacturing defect Feature- Twin Tube for longer stroke & softer initial response.- Independent ride-height adjustability separate from spring pre-load allowing the customer to set the ride height without having to worry about shock travel.- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response.- All inserts come with fitted rubber boots to protect the damper & keep clean.- Easy installation with right tools.- Anodized adjustable collars & spring seats for easy adjustment & prolonged cycle life.- Most components are made from 6061 aluminum with T6 for increased hardness --- the advantages include excellent strength, & aluminum helps keep the weight down.- Hi tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance. Note- No instruction included; Professional installation & alignment suggested.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.



...

Application Compatible for Subaru Impreza STI EJ20 EJ22 EJ25 Engine Compatible for Subaru Legacy EJ20 EJ22 EJ25 Engine Compatible for Subaru Impreza STI compatible for Forester Legacy 2.0L Turbo (EJ205 Engine) 2002-2005 Compatible for Subaru Impreza STi 2.0L Turbo (EJ207 Engine) 1998-present Compatible for Subaru Impreza 2.5L Turbo (EJ255 Engine) 2006-2014 Compatible for Subaru Impreza STI 2.5L Turbo (EJ257 Engine) 2004-2016 Compatible for Saab 9-2X 2005-2006 Compatible for Isuzu Aska 1990-1993 Compatible for Subaru Legacy for JDM 1989-2009 Compatible for Subaru Forester for JDM SF series (1997
- 2002) Compatible compatible for Subaru Impreza 2006-2014compatible for Subaru Forester XT 2004-2013 Compatible for Subaru Outback XT 2005, 2007-2009 Compatible for Subaru impreza 95-01 Compatible for Subaru Outback 95-96

Specification- Performance Con Rods- Type: Forged 4340 aircraft chrome moly quality steel for racing- H-beam Conrods Quantity: 4 Pieces as showing in picture- Bolts: Including Genuine ARP 20...


...

Application Compatible for Subaru Impreza WRX STI EJ20 EJ22 EJ25 Engine Compatible compatible for Subaru Legacy EJ20 EJ22 EJ25 Engine 2002-2005 compatible for Subaru Impreza WRX STI Forester Legacy WRX 2.0L Turbo (EJ205 Engine)1998-present compatible for Subaru Impreza WRX STi 2.0L Turbo (EJ207 Engine)2006-2014 compatible for Subaru Impreza WRX 2.5L Turbo (EJ255 Engine)2004-2016 compatible for Subaru Impreza WRX STI 2.5L Turbo (EJ257 Engine) Compatible for Saab 9-2X 2005-2006 Compatible compatible for Isuzu Aska 1990-1993 Compatible compatible for Subaru Legacy for JDM 1989-2009 Compatible compatible for Subaru Forester for JDM SF series (1997
- 2002) Compatible for Subaru Impreza WRX 2006-2014 Compatible compatible for Subaru Forester XT 2004-2013 Compatible compatible for Subaru Outback XT 2005, 2007-2009 For impreza 95-01 For Outback 95-96

Specification- TÜV Certification Con Rods- Type: Forged 4340 aircraft chrome moly quality steel for racing- H-beam Conrods Quantity: 4 Pieces as showing in picture- Bolts: Including Genuine ARP 2000 bolts- Note: Extra cost for upgrading to ARP L19 bolts
- Bolts

Size: ARP 2000 3/8" bolts
- Tolerance: Balanced to +/- 1 gram in set
- Piston Bolt Hole: +-4/1000mm
- Advertised Horsepower Rating： 200HP/piece
- Strength of the fastening (PSI): 200, 000/220, 000 PSI Torque: 48ft ≈ 65 NM- The connecting rods all include ARP 2000 bolts, which are rated at 220, 000 psi, & the optional ARP L19 material at 260, 000 psi is available as an upgraded product.
- Top acceleration: 9000rpm
- Warranty: 2 years warranty for any manufacturing defect Dimensions Center to center length: 130.5mm/5.137" Big end diameter: 55mm/2.165" Small end diameter: 23mm/0.905" Big end

Width: 21.38mm/0.840" Small end

Width: 21.38mm/0.840" Feature-

Material: Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing；- Genuine ARP 2000 bolts, Optional ARP L9 fasteners available as an upgrade；- H-Beam design reduces weight without compromising strength；- Heat-treating & Shot-peened for remained consistent & strong. Shot-peened finish to remove potential for stress risers；- 100% CNC machined, Precision rod cap alignment dowels；- Each rod is magnetic particle tested to ensure free of flaws；- 100% X-rayed, sonic tested Note- Professional installation is highly recommended (No Instruction Included)- Custom Service: If there's no conrods you need on our site, we would be happy to help determine your requirements & develop a solution with you to satisfy your needs.

















...

Application Compatible for Subaru Impreza GC8 93-01 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Quantity: Complete coilovers 2 front & 2 rear as shown in the picture Top mounts: Pillow ball top mounts Adjustable damper: No Adjustable

Height: Yes Adjustable camber plate: Front only Front & rear upper mounts: Pillow ball Spring rate front: 10 kg/mm (556 in/lbs) Spring rate rear: 6 kg/mm (336 lbs/in) Spring preload: 7-10 mm Drop Height Front: 1-3 inch Drop Height Rear: 1-3 inch Shock type: Twin tube
Colour: Gloden Warranty: one year warranty for any manufacturing defect Feature- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response.- Twin-Tube Structure --- For Low Resiliency & Securing Sufficient Stroke.- Full Length Adjustment --- separate height adjustment without sacrifice of damper stroke & without removing the coilover out from the car.- High Tensile performance spring --- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components.- Steel shock bodies are electroplated with Zinc for anti Anti-corrosion.- All inserts come with fitted rubber boots to protect the damper & keep clean.- Full rebuildable. Note- No instruction included; Professional installation & alignment suggested.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.


...

Overview Speaking of car parts, a coilover is one of the single best things you can do to suppress the shock. Maxpeedingrods has always aimed to stay at the forefront of offering high performance coilovers in UK. This coilover is guaranteed to compatible for Subaru Impreza GC8. The damper & spring are assembled as a unit prior to installation, & are replaced as a unit when either of the sub-components fails. Maxpeedingrods 24 ways adjustable Coilovers kit's allow adjustment of the vehicle's suspension. This allows you the ability to perfectly dial in your coilovers system. You can enjoy comfortable riding experience in all road conditions. Application Compatible for Subaru Impreza GC8 93-01 Specifications Quantity: Complete coilovers 2 front & 2 rear as shown in the picture Adjustable damper: 24 levels rebound dampening adjustable Adjustable

Height: Yes Adjustable camber plate: Front only Front & rear upper mounts: Pillow ball Spring rate front: 10 kg/mm (556 in/lbs) Spring rate rear: 6 kg/mm (336 lbs/in) Spring preload: 7-10 mm Drop Height Front: 1-3 inch Drop Height Rear: 1-3 inch Shock type: Twin tube
Colour: Gray Warranty: one year warranty for any manufacturing defect Features- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response.- Twin-Tube Structure --- For Low Resiliency Securing Sufficient Stroke.- 24 levels of adjustable damper --- This means that you can perfectly dial in your coilover system for both handling & comfort.- Full Length Adjustment --- separate height adjustment without sacrifice of damper stroke without removing the coilover out from the car.- High Tensile performance spring --- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable & rust resistant components.- Steel shock bodies are electroplated with Zinc for anti Anti-corrosion.- All inserts come with fitted rubber boots to protect the damper & keep clean.- Full rebuildable. Notice- Manufacture direct selling; most competitive price guaranteed best customer service guaranteed!- Performance aftermarket products; no instructions included; professional installation is suggested.- Please feel free to contact us for whatever we can help.


...

Application Compatible for Subaru Impreza GC8 93-01 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specifications Quantity: Complete coilovers 2 front & 2 rear as shown in the picture Adjustable damper: 24 levels rebound dampening adjustable Adjustable

Height: Yes, lowering 1'' to 3'' Adjustable camber plate: Front only Front & rear upper mounts: Pillow ball Spring rate front: 10 kg/mm (556 in/lbs) Spring rate rear: 6 kg/mm (336 lbs/in) Spring preload: 7-10 mm Drop Height Front: 1-3 inch Drop Height Rear: 1-3 inch Shock type: Twin tube
Colour: Gloden Warranty: one year warranty for any manufacturing defect Feature- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response.- Twin-Tube Structure --- For Low Resiliency & Securing Sufficient Stroke.- 24 levels of adjustable damper --- This means that you can perfectly dial in your coilover system for both handling & comfort.- Full Length Adjustment -...


...

Introduction MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable & adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, enhanced performance for your daily use vehicle. Application Compatible for SUBARU IMPREZA WRX 2000.08-2007.06 GDA GD9 GGA Compatible for SUBARU IMPREZA WRX STI 2000.10-2004.06 GDB (RIM P.C.D.=100) Compatible for SAAB 9-2X 2005-2007 GGA GGE Specification Top mounts: Pillow ball top mounts Damping: Not available Adjustable

Height: Yes, lowering 1" to 3" Adjustable camber plate: Front only Spring rate Front: 9 kg/mm (504 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Shock type: Twin tube Spring Preload: 7-10 mm
Colour: Golden Package includedproduct included: complete coilovers 2 front & 2 rear Dimension
Size: 71*51*21 cm Weight: 29.08 kg Feature Lowered height adjustment from 1"
- 3" which allow lower center of gravity & also add a more aggressive stance. Pillow ball top mount
- It improves the steering feel & response. Camber plate top mounts help to eliminate the need for a separate camber kit. Twin-Tube structure allows sufficient stroke within the shock absorber. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring
- STRESS TESTED OVER 600, 000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability & performance. Height Adjustment tools included. Full rebuildable.






...