Application Compatible for Toyota Celica GT GTS compatible for FWD 1990-1993 Specification Quantity: 2 pieces front + 2 pieces rear Spring rate Front:10 kg/mm (556 lbs/in) Spring rate Rear:6 kg/mm (336 lbs/in) Damper: 24 ways adjustable Damper Adjustable

Height: Yes
Colour: golden Warranty: one year warranty for any manufacturing defect Feature- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.- Coilovers are 24-way adjustable. Rebound & Dampening adjustment which allows the user the ability to dial in your coilovers to any driving needs. The user can enjoy a comfortable riding experience in all road conditions.- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response.
- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency & keep shock temps low.
- Height adjustment does not sacrifice damper stroke length.
- These coilovers are able to have their height adjusted without being taken out of the car.- High Tensile strength performance spring---Tested under a 600, 000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability & performance.- Adjustment tools included in the kit. Note No instruction included; Professional installation & alignment suggested. Please check our store for other auto parts you may be interested in. Please feel free to contact us for whatever we can help.





...

Application Compatible for Toyota Celica GT GTS compatible for FWD 1990-1993 Specification Quantity: 2 pieces front + 2 pieces rear Spring rate Front:10 kg/mm (556 lbs/in) Spring rate Rear:6 kg/mm (336 lbs/in) Damper: 24 ways adjustable Damper Adjustable

Height: Yes
Colour: golden Warranty: 2 years warranty for any manufacturing defect Feature-Adjustable ride height-Adjustable pre-load spring tension 24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coilovers system. For a nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.-Pillow ball top mount -- this design helps combat noise while tuning. It also improves the steering feel & response-Most components are made from 6061 aluminum with T6 for increased hardness -- the advantages include excellent strength, & aluminum helps keep the weight down. -Hi Tensile performance spring
- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.-All inserts come with fitted rubber boots to protect the damper & keep clean.-Improve your handling performance without sacrifice comfortable ride.-A fast & affordable way to easily upgrade your car's appearance.-Easy installation with right tools.-Ideal for any track, drift & fast road & can also be used for daily Note No instruction included; Professional installation & alignment suggested. Please check our store for other auto parts you may be interested in. Please feel free to contact us for whatever we can help.



...

Application Compatible for Toyota Celica GT GTS compatible for FWD 1990-1993

Specification- Quantity: 2 pieces front

...

Application Compatible for Toyota Celica GT GTS compatible for FWD 1990-1993

Specification- Quantity: 2 pieces front

...

Application Compatible for Toyota Celica 2.0L 3SGTE, MR2 Turbo Specification Performance Con Rods Type: Forged 4340 aircraft chrome moly quality steel for racing H-beam Conrods Quantity: 4 Pieces as showing in picture Bolts: Including Genuine ARP 2000 3/8" bolts Note: Extra cost for upgrading to ARP L19 bolts Bolts

Size: ARP 2000 3/8" bolts Tolerance: Balanced to +/- 1 gram in set Piston Bolt Hole: +-4/1000mm Power: 600hp ~ 800hp set Strength of the fastening (PSI): 220, 000/230, 000 PSI Torque: 48ft ≈ 65 NM Top acceleration: 9000rpm warranty: one year warranty for any manufacturing defect Dimensions Center to center length: 138mm Big end diameter: 51mm Small end diameter: 22mm Big end

Width: 26.7mm Small end

Width: 23.5mm Feature- Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing- Designed & processed by CNC machine.- All big & small ends are finished with SUNNEN honing machine- Precision alignment sleeves positively locate the rod cap, maintaining bi...





...

Application Compatible for Toyota Celica Corolla ​MR2 4AG 4AGE AE86 GTS 1.6 L Dimensions
Material: 4340 EN24 Aircraft Chrome
...

Overview As part of a car, hairspray lovers are one of the best things you can do to suppress an electric shock. Maxpeedingrods has been at the forefront of providing high performance coils in the UK. This coil replacement is guaranteed to fit for your compatible for Toyota Corolla 1988
- 1999 E90 E100 E110 to resist shock, & it is perfect for OEM replacements & aftermarket coils. Adjustable Coilovers can is used to run for comfort & sports in urban areas, winding roads. Prior to installation, the damper & spring are assembled as a unit & replaced as a unit in the event of failure of any of the subparts. Maxpeedingrods 24 ways adjustable Coilovers kit's allow adjustment of the vehicle's suspension. This allows you the ability to perfectly dial in your coilovers system. We always provides performance coilovers for sale with a budget price & attentive services. You can enjoy comfortable riding experience in all road conditions. Application Compatible for Toyota Corolla E90 E100 E110 AE92 AE101 AE111 1988-1999 Specification Quantity: 4PCS of Coilovers (2 piece front + 2 pieces rear) Adjustable damper: 24 ways adjustable damper force Adjustable camber plate: Yes（front only） Adjustable

Height: Yes (Front 306-396mm; Rear 341-481mm) Spring rate front: 8 kg/mm (448 lbs/in) Spring rate rear: 6 kg/mm (336 lbs/in) Shock type: Twin tube Spring preload: 7-10 mm
Colour: Red Warranty: 2 years warranty for any manufacturing defect Daily driver, occasional autocross day or occasional track days，equally at home on street & track. For those seeking a lowered stance as well as enhanced handling & response at a high value. Feature- Camber plate top mounts help to eliminate the need for a separate camber kit.- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response.- Rubber top mounts front & rear help to deliver a smooth & forgiving ride for city use at any speed, & rubber joints assist in absorbing hard impacts.- Height adjustable: Front 306-396mm; Rear 341-481mm, means that you can have more aggressive stance.- 24 levels of damping rebound adjustment allow you to perfectly dial in your coilover system for both handling & comfort.- Separate height adjustment without sacrifice of damper stroke without removing the coilover out from the car.- Dust boot included to protect damper seal.- Twin-Tube Structure --- For Low Resiliency Securing Sufficient Stroke.- High Tensile performance spring --- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6.- Billet Aluminum resulting in lightweight, durable & rust resistant components.- Steel shock bodies are electroplated with Zinc for anti Anti-corrosion.- Full rebuildable. Note- No instruction included; Professional installation alignment suggested.- Please check our store for other auto parts you may be interested in.- Please feel free to contact us for whatever we can help.



...

Introduction Ma Xpeeding Rods-B3 series (also called Ma Xpeeding Rods-SLC) based on Ma Xpeeding Rods-B2 series (also called Ma Xpeeding Rods-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. Application Compatible for Toyota Corolla E90 E100 E110 AE92 AE101 AE111 1988-1999 Notice: The coilovers kit will " Lower your car" & does not keep to the original ride height. Specification Top mount: Front camber plate；rear pillow ball Damping: 24 levels rebound damping adjustable Spring rate Front: 8 kg/mm (448 lbs/in) Spring rate Rear: 7 kg/mm (392 lbs/in) Adjustable

Height: lowering 1-3 inch Shock type: Twin tube Spring Preload: 7-10 mm
Colour: red body with black spring Package included Front complete coilover assembly rear springs & sprin...


...

Overview Speaking of car parts, a coilover is one of the single best things you can do to suppress the shock. Maxpeedingrods has always aimed to stay at the forefront of offering high performance coilovers in UK. This coilover is guaranteed to compatible for Toyota Corolla E90 E100 E110 AE92-AE111 TCB 1988-1999. The damper & spring are assembled as a unit prior to installation, & are replaced as a unit when either of the sub-components fails. Maxpeedingrods 24 ways adjustable Coilovers kit's allow adjustment of the vehicle's suspension. This allows you the ability to perfectly dial in your coilovers system. You can enjoy comfortable riding experience in all road conditions. Application Compatible for Toyota Corolla E90 E100 E110 AE92 AE101 AE111 1988-1999 Specification Quantity: 4PCS of Coilovers (2 piece front + 2 pieces rear) Adjustable damper: 24 ways adjustable damper force Adjustable camber plate: Yes（front only） Adjustable

Height: Yes (Front 306-396mm; Rear 341-481mm) Spring rate front: 8 kg/mm (448 lbs/in) Spring rate rear: 6 kg/mm (336 lbs/in) Shock type: Twin tube Spring preload: 7-10 mm
Colour: Gloden Warranty: 2 years warranty for any manufacturing defect Daily driver, occasional autocross day or occasional track days，equally at home on street & track. For those seeking a lowered stance as well as enhanced handling & response at a high value. Feature- Camber plate top mounts help to eliminate the need for a separate camber kit.- Pillow ball top mount --- this design helps combat noise while tuning. It also improves the steering feel & response.- Rubber top mounts front & rear help to deliver a smooth & forgiving ride for city use at any speed, & rubber joints assist in absorbing hard impacts.- Height adjustable: Front 306-396mm; Rear 341-481mm, means that you can have more aggressive stance.- 24 levels of damping rebound adjustment allow you to perfectly dial in your coilover system for both handling & comfort.- Separate height adjustment without sacrifice of damper stroke & without removing the coilover out from the car.- Dust boot included to protect damper seal.- Twin-Tube Structure --- For Low Resiliency & Securing Sufficient Stroke.- High Tensile performance spring --- Under 600, 000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability & performance.- Most pieces in our Coilover systems, including mounts, collars & spring perches, are designed from 6061-T6.- Billet Aluminum resulting in lightweight, durable & rust resistant components.- Steel shock bodies are electroplated with Zinc for anti Anti-corrosion.- Full rebuildable. Note-No instruction included; Professional installation & alignment suggested.-Please check our store for other auto parts you may be interested in.-Please feel free to contact us for whatever we can help.


...

Application Compatible for Toyota Corolla Celica 7AFE 1.8L 4340 Forged Specification Performance Con Rods Type: Forged 4340 aircraft chrome moly quality steel for racing H-beam Conrods Quantity: 4 Pieces a set Bolts: Including Genuine ARP 2000 bolts Note: Extra cost for upgrading to ARP L19 bolts Bolts

Size: ARP 2000 3/8" bolts Tolerance: Balanced to +/- 1 gram in set Piston Bolt Hole: +-4/1000mm Power: 600hp ~ 800PS per set Strength of the fastening (PSI): 220, 000/230, 000 PSI Torque: 48ft ≈ 65 NM Top acceleration: 9000rpm warranty: one year warranty for any manufacturing defect Dimensions Center to center length: 132.5mm Big end diameter: 51mm Small end diameter: 20.01mm Big end

Width: 21.8mm Small end

Width: 21.8mm Feature- Forged SAE 4340 Chrome Moly Steel for the highest strength & durability, dedicated for Racing- Designed & processed by CNC machine.- All big & small ends are finished with SUNNEN honing machine- Precision alignment sleeves positively locate the rod cap, maintaining big end bore size & eliminating cap walk- 100% X-rayed, sonic tested & magnafluxed- Multi-stage heat treated- Shot peened to relieve stress- Come with the bronzed bushing suitable for the floating piston pin Note- Professional installation is highly recommended (No Instruction Included)- Custom Service: If there's no conrods you need on our site, we would be happy to help determine your requirements & develop a solution with you to satisfy your needs.





...